Sub 600T Searambler Bracelet Watch 861.10.021.10

In the '80s, DOXA was still part of the Aubry Frères company, before its acquisition by the Jenny family in the early '90s, to whom it still belongs. One such model is the SUB 600T. When it comes out, it is immediately recognizable as a DOXA diver with its bright orange dial. At the same time, it is as much an evolution as it is a revolution. Looking back, it seemed as if there had been a parallel SUB universe. Gone is the curvy tonneau case. Instead, a hefty chamfered block with straight angles, an offset crown at 4 o'clock. The unidirectional bezel that allows the calculation of the dive time without decompression stops - a DOXA patent - is more massive too, with the functional benefit of improved legibility and handling with a gloved hand. The principles of the DOXA diving tool watch attuned to its time. Remember, this is the Eighties: Goodbye soft curves, hello straight lines, right angles and a functional aesthetic.

MOVEMENT
Swiss mechanical automatic, self-winding
Power Reserve 38 hours
Frequency 28800.0 vph (4.0 hz)
26 Jewels
Decorated by DOXA
CASE
Stainless steel case
Diameter 40.00 mm x 47.60 mm
Height 14.15 mm
Screw in crown
Water resistance 60 bar / 600 meters / 1'970 ft
INDICATIONS
Hours, minutes, seconds
Date
FEATURES
Sapphire crystal
Unidirectional rotating bezel
Sandblasted stainless steel or ceramic inlay bezel
BRACELET / STRAP
Stainless steel bracelet attached by screws to ensure a secure fit
Folding clasp with wetsuit extension, DOXA fish logo