Sub 600T Professional Strap Watch 862.10.351.21

In the '80s, DOXA was still part of the Aubry Frères company, before its acquisition by the Jenny family in the early '90s, to whom it still belongs.

One such model is the SUB 600T. When it comes out, it is immediately recognizable as a DOXA diver with its bright orange dial. At the same time, it is as much an evolution as it is a revolution. Looking back, it seemed as if there had been a parallel SUB universe. Gone is the curvy tonneau case. Instead, a hefty chamfered block with straight angles, an offset crown at 4 o'clock. The unidirectional bezel that allows the calculation of the dive time without decompression stops - a DOXA patent - is more massive too, with the functional benefit of improved legibility and handling with a gloved hand. The principles of the DOXA diving tool watch attuned to its time. Remember, this is the Eighties: Goodbye soft curves, hello straight lines, right angles and a functional aesthetic

Movement
Sellita SW 200-1
Mechanical, self-winding
38-hour power reserve
Frequency: 28’800 vph (4.0 Hz)
26 rubies
DOXA decorations
Case
316L stainless steel case
Diameter: 40.00 x 47.60 mm
Thickness: 14.15 mm
Screw-down crown at 4pm
Water resistance: 60 bar / 600 meters / 1,970 feet
Features
Sapphire crystal
Unidirectional rotating bezel with stainless steel insert
Bezel markings in color (depth) and white (dive time), light dot at 12 o’clock
Bezel insert in sand-blasted stainless steel or ceramic